Proximity Sensors # E2E-X2ME1-Z "Omron"

รหัสสินค้า OMRON

กลับไปที่: พร็อกซิมิตี้ เซนเซอร์ Proximity Sensors

รายละเอียด

Cylinder type sensing head size	M8
Type	Unshielded
Sensing method	Inductive type
Sensing distance	2 mm -10% to +10%
Setting distance	0 to 1.6 mm
Differential distance	10% Max. of sensing distance
Sensing object	Ferrous metal (Sensitivity lowers with non-ferrous metals.)
Standard sensing object	Iron 12121mm
Response frequency	0.8 kHz (average)
Power supply voltage	12 to 24 VDC (ripple(p-p) :10% Max.)
Operating voltage range	10 to 40 VDC
Current consumption	13 mA Max.
Control output (Output type)	NPN voltage-current output
Control output (Switching capacity)	0 to 200 mA
Control output (Residual voltage)	2 V Max. （under load current with cable length of 2m）
Indicator	Operation indicator(red)
Operation mode	NO
Protective circuit	Surge suppressor Output short-cut protection Power supply reverse polarity protection
Standard or Different frequency	Standard
Ambient temperature	Operating: -40 to 85 CEL Storage: -40 to 85 CEL (with no icing or condensation)
Ambient humidity	Operating: 35 to 95 %RH Storage: 35 to 95 %RH (with no condensation)
Temperature influence	+-10% Max. of sensing distance in temperature range of -25 to +70CEL +-15% Max. of sensing distance in temperature range of -40 to +85CEL (As the basis for sensing distance of 23CEL)
Voltage influence	+-1% Max. of sensing distance in rated voltage range +-15%. (As the basis for sensing distance at standard power voltage)
Insulation resistance	50 M OHM Min. at 500VDC between charged parts and the case
Dielectric strength	1000 VAC 50/60 Hz for 1 minute between charged parts and the case
Vibration resistance	10 to 55 Hz, 1.5-mm double amplitude for 2 hours each in X, Y, and Z directions
Shock resistance	500m/s2 for 10 times each in X, Y, and Z directions
Degree of protection	IEC60529: IP67 Company standard: Oil-proof
Applicable standard (EC Directive (Low Voltage Directive))	EN60947-1 EN60947-5-2
Applicable standard (EC Directive (EMC Directive))	EMI: EN60947-5-2 Emission Enclosure: CISPR11 Group 1 class A EMS: EN60947-5-2 Immunity ESD: IEC61000-4-2 Immunity RF-interference: IEC61000-4-3 Immunity Conducted Disturbance: IEC61000-4-6 Immunity Burst: IEC61000-4-4 CE marking: Equipped
Applicable standard (CCC mark)	Not equipped
Connection method	Pre-wired models (Cable length: 2 m)
Weight (Packed state)	approx. 65 g
Material (case)	Stainless steel (SUS303)
Material (sensing surface)	PBT
Material (clamping nuts)	Brass nickel plating
Material (toothed washer)	Iron zinc plating
Accessories	Instruction manual